Cisco Packet Tracer - Wireless Router Configuration

 Hello Guys !!!!!!

Welcome to Network Engineer Stuff blog !!!!

In this blog We are going to see How we can configure Wireless router in Cisco packet tracer.

IF YOU NEED THE LAB MAIL US ON :- networkengineerstuff@gmail.com

Lets First Configure the Router 

====================================================================

Router Configuration 

---------------------------------

Router(config)#int gi0/0/0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/0, changed state to up

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#exit

====================================================================

On Laptop --> We need to select the Wireless Card 

and then check the ip address which we will be automatically gained from the wirless router 

Now we can connect the wireless router from the PC using the IP address ---> 192.168.0.1 

Default username & password - admin

Now change the WAN IP which is under Internet Setup 

Now lets change the LAN IP address under Network Setup 

This will interrupt the connection and we will get the timeout 

Lets check if the laptop got the new address 

and ping the PC0 AND PC1

Let change the Wireless router SSID and password 

While changing the Router SSID & password the connection will be interrupted so we have to login again 

 Now lets connect another laptop in the network or pc 

Now lets ping PC1 from PC2

That's successful 

Thanks for Reading !!!!!!

Network Engineer Stuff

Subscribe to Youtube Channel 

Network Engineer Stuff