It is very easy to Configure IP address to a PC and Server in Cisco Packet Tracer
Simply Click on the icon of the PC or Server
and refer the snapshot
By clicking on Command Prompt option you will get an command prompt by using which you can
perform ping test and various stuff
Thanks for reading !!!!!
amartechstuff
1) Configure the hostname of the Switch as SW1
2) Set a message of the day (MOTD) banner for the switch -
*************************************************
Only Authorized Users Allowed
*************************************************
3) Configure a
line console password - India@123
line vty - cisco
enable secret password - Cisco@123
==================================================
Solution
==================================================
1) Configure the hostname of the Switch as SW1
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname SW1
SW1(config)#exit
2) Set a message of the day (MOTD) banner for the switch
SW1(config)#banner motd $
Enter TEXT message. End with the character '$'.
*************************************************
Only Authorized Users Allowed
*************************************************
$
SW1(config)#^Z
SW1#exit
*************************************************
Only Authorized Users Allowed
*************************************************
SW1>
3) Configure a line console password - India@123 l
ine vty - cisco
enable secret password - Cisco@123
SW1#config t
SW1(config)#line console 0
SW1(config-line)#password India@123
SW1(config-line)#login
SW1(config)#enable secret Cisco@123
SW1(config)#exit
SW1#
*************************************************
Only Authorized Users Allowed
*************************************************
User Access Verification
Password:
SW1>en
Password:
SW1#
Thanks for reading
amartechstuff
